Data Cabling Services in North Austin

The above picture is a minimal data cabling job for a customer in North Austin. They were transitioning to VOIP. They wanted to start fresh with all new data cables terminated on a patch panel with just 1 Network POE switch. From here, all we had to run was 1 data cable tied to the router, which is their whole IT configuration. Straightforward configuration, but it works well. IT (Information Technology) can be simple, especially for smaller customers.

BCS Austin

The above picture is a cable job for a small customer. Help them mount their existing network switch and install the router. 
Scope of Work:  Install Data cables and jack. Terminate, test, and label.
Additional Work – Help customer mount and install their network switch. Help customers setup primary network, file sharing, and printer setup.

BCS Austin

The above picture is a cable job for a small branch office of a large corporation. Help them mount their existing network switch.

Scope of Work:

1. Install data cables and jack.
2. Terminate, test, and label.
3. Help customer mount and install their network switch and rack. 
4. Notes: The customer had their corporate IT come in afterward to finish setting up their branch office network to TIE to their main headquarters. 

BCS Austin

small cable job and access point installation.

Scope of Work:

1. Install data cables and mount access points.
2. Coordinate with corporate IT to ensure they can see the access point, network, and program.
3. Help them test the Wi-Fi network after IT at headquarters finishes programming the access point.

Notes: The customer had their own corporate IT office in another state. It was more feasible for a local data company that could run the data cables and help them install the access point. If you have a branch office in Austin that needs some data cables run and some network equipment installed, give us a call. Let us help you save some traveling money and do the job more efficiently.

BCS Austin

Data / Server Room Clean in South Austin.

We had a customer that we have been helping them with their phones for the last 20 years. They always complain about how their existing managed IT services company doesn’t respond to their help request in a reasonable time. So we had a meeting with this customer regarding their IT needs. During the call, we discovered that the customer wanted the data server room clean, as when the internet, phones, or any IT software or hardware doesn’t work. They got the IT company on the phone, but finding the hardware, cables, or devices they sought was challenging because the server room was unorganized.

Scope of Work:  Clean up data/server room—label equipment so customers can know each device and what it does.

Notes:  In the end, this makes our job and customer life easier, especially when things go down. In IT, it’s not if it will go down; it’s when it goes down; we all need to know what to do or have a plan. Suppose you are tired of your IT server room looking messy and ready to resolve this. Give us a call. A little bit of time and money can help you minimize downtime.

BCS Austin

Install 7′ Rack with patch panel data cables and ground bar

Scope of Work: This is a job in Cedar Park where we ran roughly 20 data cables, installed a 24 port patch panel, and established a 7 feet 2 post rack with a ground bus bar and, of course, ground wire.
Notes:  This is starting to be a widespread configuration for us. The customer was willing to spend some money on a rack and patch panel install. It helps keep their server room clean. It helps make it easier to troubleshoot problems later on as it happens.

BCS Austin

Data cables installation and IT Move in Georgetown

Scope of Work: This is a data cabling job we did for a customer in Georgetown. They were in the process of moving to a new building. We tested and labeled all data cables; this helped make it easier to move all the equipment later on during move time. It helps minimize downtime as well.
Notes:  This was a 3 phase project. Phase 1 was the prewire and hardware installation. We tested all the data cables and jacks. Phase 2, we had the internet installed. They have a VoIP system, so we took a few phones to the new locations and made test calls inbound and outbound. We also test the upload and download speed tests. For Phase 3, we had to schedule some downtime. We had to move the customer servers and exchange servers and reconfigure all their DNS records. We tested application software and emails once everything was set up and moved.

BCS Austin

Install burial data cable inside the conduit underground.

The picture above was a job in South Austin with multiple buildings involved. We had to run various tie cables between buildings to network these buildings together. Due to the distance between some of these buildings exceeding the allowable length for Cat 6 Data cables, we had to run some fiber optic cables. In this project, customers opt for OM3 fiber optic cables as they want room for growth shortly. The picture here shows PVC conduit installed on the post and going underground. If you are in the market that requires a vendor to help you build the data cabling infrastructure to tie multiple buildings together, call us. Let us be your cable vendor.

BCS Austin

Data cables run outdoors inside Jbox and conduit.

Above was a job in South Austin where we ran multiple data cables inside PVC to protect it from the elements (wind, water, sun). We installed numerous access points throughout the property. We installed an eight-port POE network switch to power up all the wireless access points without needing electricity installed at every location. If you require something similar, give us a call. Let us help you.

BCS Austin

Troubleshooting and Repairing a Data Jack not working.

Here, we have a picture of our tech troubleshooting and fixing a data jack that is not working. This ticket was a straightforward job as it was apparent why it was not working. We offer troubleshooting and repair services for your voice and data network, whether it is simple or complex. Call us now to schedule your appointment.

BCS Austin

Access Point and data cables installed outdoors with Junction box.
The picture above was a job in South Austin installing multiple wireless access points throughout the large acre community. Although it is a wireless mesh network setup, we ran physical data cables to minimize interference and signal loss. Call us if you have a similar project and need a vendor to run lines, install access points, and help you with setup and program. Let us help you.

BCS Austin

Here, we installed a low-voltage box in preparation for a new data cable run and an internet jack installed for the TV.

BCS Austin

Picture above shows what the The picture above shows what the back of the TV would look like after we installed the data jack next to an electrical outlet. Note: We did not install the electrical outlet.

BCS Austin

The customer requested that we install 2 TVs side by side. This install is for their conference room. Installing two TVs side by side makes it easier for them to compare two pictures.

BCS Austin